home | company info | contact us
 Architectural Pulls · Standards · 
[Back to Pulls]

These one inch diameter solid push and pulls are the industry standard for contemporary design and Rockwood sets the standard for quality and value in this product category. Our offset pulls come with a 2-1/2" clearance for enhanced ADA compliance. Use two or three push bars on a door as an attractive design element and increased usability for people of all heights.

View Catalog Page-PDF

Detailed Views


Available Styles
To view detailed information for an available style, click on its corresponding Item# link in the scrollable table below. After clicking on the Item# link, you can then view the cut sheet for the selected item and view all associated item details in the tab panel.

45˚ Offset Pulls 166 8" CTC
167 10" CTC
167A 9" CTC
168 12" CTC
169 18" CTC
90˚ Offset Pulls BF156 8" CTC
BF157 10" CTC
BF157A 9" CTC
BF158 12" CTC
BF159 18" CTC
Series 47 Offset Push Pull Sets BF15647 8" CTC
BF15747 10" CTC
BF157A47 9" CTC
BF15847 12" CTC
Series 47 Push Bars 47
Series 47 Straight Push Pull Sets 11047 8" CTC
11147 10" CTC
111A47 9" CTC
11247 12" CTC
Single Projection Push Bar SP47
Straight Pulls 110 8" CTC
111 10" CTC
111A 9" CTC
112 12" CTC
118 18" CTC
  For Selected Item:   111A47
Selected Item:   111A47
Line Drawing:

To view a larger version, click on the image at right.

Selected Item:   111A47
MATERIAL: Aluminum, Brass, Bronze, or Stainless Steel

Metal and Wood: T3 Back to Back and Thru Bolt; Pull Free End = 1, Push Free End = 1, Common End = 5.

Metal:  T4 Back to Back and Concealed; Pull Free End = 6, Push Free End = 6, Common End = 5.

Wood:  T5 Back to Back and Concealed; Pull Free End = 8, Push Free End = 8, Common End = 5.

Metal & Wood:  T1 Back to Back and Decorative Bolt; Pull Free End = 12, Push Free End = 12, Common End = 5.

Glass:  T2 Back to Back and Thru Bolt; Pull Free End = 15, Push Free End = 15; Common End = 13.

T3 is the standard mounting method for Metal and Wood Doors. (See our mounting selections on this site.)

Specify product number, mounting, door type, push bar CTC, and finish (i.e., 111A47 T3, wood door, 33" CTC, US32D316).

 Engraving "PUSH" or "PULL" (specify handing).
 Base plates available  use BP prefix (BP111A47) when ordering.
 Heavy duty versions of most fastening types available  use suffix HD to fastening type number (111A47 T3HD).


CTC:  9"
Projection:  3"
Clearance:  2"

Projection:  2-1⁄2"
Clearance:  1-1⁄2"

WEIGHT:  11.7 lbs.

ANSI 156.6:  J504
Selected Item:   111A47

Our mounting systems firmly attach the pull to the door and are guaranteed for the life of the door. Choose from thrubolt, back to back or concealed mountings for wood, metal and glass doors.

Note: Y base plates are recommended on wood or glass doors to make a stable and durable mounting.

Note: Heavy Duty (HD) mounting features hex drive for positive tightening and large overall size for superior strength. Recommended for high frequency and rough service openings.

Mounting Options:

Click on a mounting type and view drawing for this item.

Selected Item:   111A47

Most of Rockwood's products are available in a wide variety of architectural finishes. The photographs generally show only one finish for aesthetic reasons, but we make all traditional architetural finishes. The base metal is indicated in the Specs folder. All available finishes for this item are listed at right.

Available Finishes:

   White Powder Coat/WPC
   Red Powder Coat/RPC
   Black Powder Coat/BPC
Selected Item:   111A47
Application Suggestion:

To view a larger version, click on the image at right.
No Image Available for This Item